promotional area

Technical Details

Solar Collector Panel

The solar collector comes in four standard configurations – 15 tube, 20 tube, 30 tube and 40 tube.

15 tube 20 tube 30tube40 tube
Dimensions (L&W) 1500mm x 1940mm 2000mm x 1940mm 3600mm x 1940mm4200mm x 1940mm
Absorber dimension 1670mm x 62mm x 15 1670mm x 62mm x 20 1670mm x 62mm x 301670mm x 62mm x 40
Absorber area 1.55m2 2.07m2 3.11m24.14m2
Manifold Insulation Rockwool Rockwool RockwoolRockwool
Manifold header casing Anodised Aluminium Anodised Aluminium Anodised AluminiumAnodised Aluminium
Frame Anodised Aluminium Anodised Aluminium Anodised AluminiumAnodised Aluminium
Weight 76kg 91kg 143kg184kg
Roof Load(with AS2 Roof Fixing Kit (Kg/M2)) 18kg/m2 21kg/m2 22kg/m221kg/m2

Evacuated Glass Tube

Each glass tube in the SOLARGENIUSET system is manufactured from tough borosilicate glass within a quality controlled environment conforming to ISO9001 standards.

Length (nominal) 1838mm
Outer tube diameter 70mm
Inner tube diameter 66mm
Glass thickness 2.0mm
Thermal expansion 3.3x10 >-6°C
Material Borosilicate glass 3.3
Absorptive coating – heat fin Graded Al-N-Al
Absorption >92% (AM1.5)
Emittance <8% (80°C)
Vacuum <5x102Pa
Stagnation temperature >220°C
Heat loss <0.8W/ ( m2°C )
Maximum strength 0.8MPa

Solar Controller

The solar controller compares the temperature in the hot water cylinder with that in the solar panel and activates a pump to circulate heated water from the solar panel to the hot water cylinder when there is solar gain. It can also prevent frost formation in the system by activating the pump if the temperature of the collector falls below a predetermined level.

Dimensions 210mm x 145mm x 48mm
Power consumption 3W
Measuring accuracy of temperature ±2°C
Temperature range of measurement 0 - 150°C
Inputs/outputs 6 inputs/5 outputs
Ambient temperature range -10°C to 50°C

Solar Water Circulating Pump

The solar pump circulates water from the hot water cylinder to the inlet of the solar collector during solar heating operations.

Dimensions 115mm x 130mm
Weight 5kg
Flow settings 3
Inlet/outlet 3/4" M Union
Voltage 230V/50Hz

Hot Water Cylinder

Features:

  • Patented inner vessel enamel lining technology using special silicide on the inner steel baked at 900°C (Patent No. 99230552.7).
  • Polyurethane insulation.
  • Replaceable anode magnesium rod.
  • Strong durable external casing.
  • Also available in stainless steel 316
07C008 07C009 07C010
Storage capacity 250 Litre 300 Litre 350 Litre
Storage capacity 250L 300L 350L
Diameter 520mm 620mm 620mm
Height 1500mm 1270mm 1520mm
Net weight empty 65kg 66kg 82kg
Outer casing Colorbond galvanised steel Colorbond galvanised steel Colorbond galvanised steel
Insulation Polyurethane Polyurethane Polyurethane
Inner shell* Silicide lined steel Silicide lined steel Silicide lined steel
Relief valve pressure 850kPa 850kPa 1000kPa
Element (A) 300mm 300mm 300mm
Cold water inlet (B)3/4" Female 100mm 3/4" Female 100mm 3/4" Female 100mm
Alternative Water Outlet (C)3/4" Female 200mm 3/4" Female 200mm 3/4" Female 200mm
Lower Temperature probe (D) 410mm 410mm 410mm
Alternative Water Inlet (E)3/4" Female 640mm 3/4" Female 640mm 3/4" Female 640mm
Upper Temperature probe (F) 3/4" Female 1050mm 3/4" Female 780mm 3/4" Female 1035mm
Hot water outlet (G) 3/4" Female 1355mm 3/4" Female 1065mm 3/4" Female 1340mm
Drain (H) 90mm 90mm 90mm
Electric heating element 2.4 - 3.0Kw 2.4 - 3.0Kw 2.4 - 3.0Kw
Electrical entry (F) 300mm 300mm 300mm
Replaceable magnesium anode Yes Yes Yes
Colour White White White
*Customised Stainless Steel also available. **400L and 500L available upon request.