The solar collector comes in four standard configurations – 15 tube, 20 tube, 30 tube and 40 tube.
| ||15 tube ||20 tube ||30tube||40 tube|
|Dimensions (L&W) ||1500mm x 1940mm ||2000mm x 1940mm ||3600mm x 1940mm||4200mm x 1940mm|
|Absorber dimension ||1670mm x 62mm x 15 ||1670mm x 62mm x 20 ||1670mm x 62mm x 30||1670mm x 62mm x 40|
|Absorber area ||1.55m2 ||2.07m2 ||3.11m2||4.14m2|
|Manifold Insulation ||Rockwool ||Rockwool ||Rockwool||Rockwool|
|Manifold header casing ||Anodised Aluminium ||Anodised Aluminium ||Anodised Aluminium||Anodised Aluminium|
|Frame ||Anodised Aluminium ||Anodised Aluminium ||Anodised Aluminium||Anodised Aluminium|
|Weight ||76kg ||91kg ||143kg||184kg|
|Roof Load(with AS2 Roof Fixing Kit (Kg/M2)) ||18kg/m2 ||21kg/m2 ||22kg/m2||21kg/m2|
Each glass tube in the SOLARGENIUSET system is manufactured from tough borosilicate glass within a quality controlled environment conforming to ISO9001 standards.
|Length (nominal) ||1838mm|
|Outer tube diameter ||70mm|
|Inner tube diameter ||66mm|
|Glass thickness ||2.0mm|
|Thermal expansion ||3.3x10 >-6°C|
|Material ||Borosilicate glass 3.3|
|Absorptive coating – heat fin ||Graded Al-N-Al|
|Absorption ||>92% (AM1.5)|
|Emittance ||<8% (80°C)|
|Stagnation temperature ||>220°C|
|Heat loss ||<0.8W/ ( m2°C )|
|Maximum strength ||0.8MPa|
The solar controller compares the temperature in the hot water cylinder with that in the solar panel and activates a pump to circulate heated water from the solar panel to the hot water cylinder when there is solar gain. It can also prevent frost formation in the system by activating the pump if the temperature of the collector falls below a predetermined level.
|Dimensions ||210mm x 145mm x 48mm|
|Power consumption ||3W|
|Measuring accuracy of temperature ||±2°C|
|Temperature range of measurement ||0 - 150°C|
|Inputs/outputs ||6 inputs/5 outputs|
|Ambient temperature range ||-10°C to 50°C|
The solar pump circulates water from the hot water cylinder to the inlet of the solar collector during solar heating operations.
|Dimensions ||115mm x 130mm|
|Flow settings ||3|
|Inlet/outlet ||3/4" M Union|
- Patented inner vessel enamel lining technology using special silicide on the inner steel baked at 900°C (Patent No. 99230552.7).
- Polyurethane insulation.
- Replaceable anode magnesium rod.
- Strong durable external casing.
- Also available in stainless steel 316
| ||07C008 ||07C009 ||07C010|
|Storage capacity ||250 Litre ||300 Litre ||350 Litre|
|Storage capacity ||250L ||300L ||350L|
|Diameter ||520mm ||620mm ||620mm|
|Height ||1500mm ||1270mm ||1520mm|
|Net weight empty ||65kg ||66kg ||82kg|
|Outer casing ||Colorbond galvanised steel ||Colorbond galvanised steel ||Colorbond galvanised steel|
|Insulation ||Polyurethane ||Polyurethane ||Polyurethane|
|Inner shell* ||Silicide lined steel ||Silicide lined steel ||Silicide lined steel|
|Relief valve pressure ||850kPa ||850kPa ||1000kPa|
|Element (A) ||300mm ||300mm ||300mm|
|Cold water inlet (B)||3/4" Female 100mm ||3/4" Female 100mm ||3/4" Female 100mm|
|Alternative Water Outlet (C)||3/4" Female 200mm ||3/4" Female 200mm ||3/4" Female 200mm|
|Lower Temperature probe (D) ||410mm ||410mm ||410mm|
|Alternative Water Inlet (E)||3/4" Female 640mm ||3/4" Female 640mm ||3/4" Female 640mm|
|Upper Temperature probe (F) ||3/4" Female 1050mm ||3/4" Female 780mm ||3/4" Female 1035mm|
|Hot water outlet (G) ||3/4" Female 1355mm ||3/4" Female 1065mm ||3/4" Female 1340mm|
|Drain (H) ||90mm ||90mm ||90mm|
|Electric heating element ||2.4 - 3.0Kw ||2.4 - 3.0Kw ||2.4 - 3.0Kw|
|Electrical entry (F) ||300mm ||300mm ||300mm|
|Replaceable magnesium anode ||Yes ||Yes ||Yes|
|Colour ||White ||White ||White|
|*Customised Stainless Steel also available. **400L and 500L available upon request.|